Last Updated April 22, 2008

Put your expertise in the telecommunications field to work for a dynamic and growing company. Sunrise is paving the way for broadband deployment - helping service providers and manufacturers solve the complex problems involved in installing, troubleshooting, and maintaining their networks.

Sunrise Telecom is an Equal Opportunity Employer and offers a comprehensive benefits package including:

• Health/vision/dental coverage
• Life/travel/disability Insurance
• Paid holiday/personal leave
• 401(k) program
• Educational development assistance

If you enjoy being part of a skilled and enthusiastic team, come take a look at our current job opportunities.

Engineering

Hardware

Hardware Engineer. As a Hardware Engineer you will work with senior engineers in investigating, designing, developing, testing and/or maintaining features and circuits that are part of one of Sunrise Telecom’s handheld or portable test instruments. These instruments are hand-held and portable test equipment that are used worldwide by major carriers and service providers to install, maintain, and diagnose the telecommunications network, and range from the Scalable Test Toolkit (STT) to the recently released Home Test Toolkit (HTT).

In this position, course work in board-level circuit design, FPGA design, hardware processes and lifecycles is required. Practical (intern or co-op) or applied hardware design work experience is highly desired, including VHDL programming skills; product life cycle execution: definition, simulation, design, verification and test prototyping, debugging, qualification, release to production, etc.; experience with embedded processors and circuits; experience with technologies required for developing internet connected devices. The position includes the following responsibilities:

• Design, develop and test and troubleshoot electrical circuit boards or FPGAs that conform to requirements, architecture, industry standards, and provides for reuse and maintainability.
• Implement, test, and deliver printed circuit boards that meet requirements with high quality.

Software

No current openings.

Firmware

No current openings.

Testing

No current openings.

Compliance

No current openings.

Quality

PV Engineer I. The PV Engineer will develop and execute Test Plan, Test Design for automation and manual testing. Will create Test Report and provide product quality analysis. Will perform product hardware test, thermal test, vibration test. Will assist Compliance engineer to execute compliance test projects. Will manage and organize compliance test lab setup. Will raise/troubleshoot issues / reproduce and characterize problems. Will report defects using Bugzilla and follow through the defect resolution and status. Will interface with hardware design team to develop test methodology. Will communicate with all team members and management team concerning product quality. Must have a degree in electrical engineering. Must have working experience with test equipment such as oscilloscope, spectrum analyzer, and test tool such as Labview Must have knowledge in Electromagnetic emission and analog circuit design. Must have excellent written, communication, and interpersonal skills. Must have strong troubleshooting skills. Must have strong sense of ownership and accountability. Must have strong analytical skills to debug and isolate problems. Must be a self starter, proactive and must be able to handle multiple tasks. Job Code: SC-PV1EE08. Click here to apply.

PV Engineer II. The PV Engineer will develop and execute Test Plan, Test Design for automation and manual testing. Will create Test Report and provide product quality analysis. Will perform product hardware test, thermal test, vibration test. Will be responsible purchasing, managing, and organizing test equipment and unit under test. Will manage and organize test lab setup. Will raise/troubleshoot issues / reproduce and characterize problems. Will report defects using Bugzilla and follow through the defect resolution and status. Will interface with hardware design team to develop test methodology. Will communicate with all team members and management team concerning product quality. Must have a degree in electrical engineering. Must have working experience with test equipment such as oscilloscope, spectrum analyzer, and test tool such as Labview. Must have excellent written, communication, and interpersonal skills. Must have strong troubleshooting skills. Must have strong sense of ownership and accountability. Must have strong analytical skills to debug and isolate problems. Must be a self starter, proactive and must be able to handle multiple tasks. Job Code: SC-PV2EE08. Click here to apply.

Mechanical

Sr. Mechanical Engineer. The Sr. Mechanical Engineer will develop chassis/package designs for Sunrise Telecom’s handheld and portable test equipment. Will work closely with management, marketing, and other engineers to design industry-leading handheld and portable test equipment for telecommunications, and will act as liaison between engineering and manufacturing on mechanical design issues. Will consult with electronic hardware engineering, marketing, production, sales, and customers to establish design concepts. Will evaluate design ideas based on factors such as design-function relationships, serviceability, materials and methods engineering, application, budget, price, production costs, methods of production, market characteristics, and specifications, and then integrates findings and concepts into design ideas. Will prepare and/or coordinate preparation of working drawings from sketches and design specifications. Will then present the design to Marketing and Engineering management and discuss needs for modification and change. Will prepare designs, and will work with offshore manufacturing to build models and/or mock-ups, obtain internal approvals, and shepherd the design through the development, prototype, pilot, and production processes. Responsibilities of this position will include, but will not be limited to: design and development of new products, as well as modifications to existing products; communication with vendors and suppliers; implementing designs into production; material selection; standards compliance (UL, CE, etc.); safety reviews; using design development tools and techniques; Design for Manufacture, Assembly and Inspection; CAD and 3D Design tools. Must have experience in the most of the following areas: plastic injection molding; die-cast molding; electronic packaging; stamping; CNC; manufacturing processes; CAD (Pro E preferred); geometric tolerancing; thermal analysis; design for assembly/manufacturability/ quality; and experience with off-shore sourced products.

Requirements:

• B.S.M.E. or equivalent plus 6 or more years experience in commercial/industrial product design and development
• Proficiency in 2Dand 3D CAD programs, preferably with Pro E
• Ability to perform engineering analysis of a new product design
• Specialized knowledge of handheld and portable devices, test equipment, and/or scientific instruments
• A demonstrated ability to build consensus with team members, while being open and responsive to design management
• An ability to work with others as part of the product development process
• Design experience with injection molded plastics and die-cast metals, as well as electronic instrument design experience
• An ability to balance design ownership with realities of manufacturability and engineering
• Strong communication and presentation skills
• Ability to speak Mandarin (as well as English) is a plus
• Ability to communicate easily with sketches and electronic presentation tools

Mechanical Engineer I. The Mechanical Engineer you will be responsible for the support, design, and analysis of new and/or existing mechanical hardware as part of an engineering team. Will work closely with electrical engineers and industrial designers to develop package designs for Sunrise Telecom's handheld and portable test instruments. These instruments are hand-held and portable test equipment that are used worldwide by major carriers and service providers to install, maintain, and diagnose the telecommunications network, and range from the Scalable Test Toolkit (STT) to the recently released Home Test Toolkit (HTT). New product design will include various types of analysis, mechanical packaging of electronics, CAD concept model generation, and creation of program metrics. Interaction with internal customers and suppliers will occur depending upon the nature of the project - this may include travel to other sites or suppliers.

Requirements for position:

• Bachelor of Science or MS degree in Mechanical Engineering.
• 0-2 year experience in mechanical design - course related design will be considered as experience.
• Experience in the use of Pro/E CAD tool.
• Excellent verbal and written communications skills.
• Excellent problem solving skills.
• Ability to manipulate several tasks in a fast-paced environment.
• Highly motivated, self-starting individual.
• Strong teamwork skills.
• Experience with other CAD tools such as SolidWorks and/or AutoCAD is a plus.
• Experience with finite element analysis and/or thermal analysis is a plus.
• Experience with plastic injection molding and/or die casting is a plus.

Mechanical Engineer II. The Mechanical Engineer II will develop chassis/package designs for Sunrise Telecom's handheld and portable test equipment. Will work closely with management, marketing, and other engineers to design industry-leading handheld and portable test equipment for telecommunications, and will act as liaison between engineering and manufacturing on mechanical design issues. Will consult with electronic hardware engineering, marketing, production, sales, and customers to establish design concepts. Will evaluate design ideas based on factors such as design-function relationships, serviceability, materials and methods engineering, application, budget, price, production costs, methods of production, market characteristics, and specifications, and then integrates findings and concepts into design ideas. Will prepare and/or coordinate preparation of working drawings from sketches and design specifications. Will present the design to Marketing and Engineering management and discuss needs for modification and change. Will prepare designs, and will work with offshore manufacturing to build models and/or mock-ups, obtain internal approvals, and shepherd the design through the development, prototype, pilot, and production processes. Responsibilities of this position will include, but will not be limited to: design and development of new products, as well as modifications to existing products; communication with vendors and suppliers; implementing designs into production; material selection; standards compliance (UL, CE, etc.); safety reviews; using design development tools and techniques; Design for Manufacture, Assembly and Inspection; CAD and 3D Design tools.

Must have experience in the most of the following areas: plastic injection molding; die-cast molding; electronic packaging; stamping; CNC; manufacturing processes; CAD (Pro E preferred); geometric tolerancing; thermal analysis; design for assembly/manufacturability/ quality; and experience with off-shore sourced products. Must have B.S.M.E. or equivalent plus 3 or more years experience in commercial/industrial product design and development. Must be proficient in 2Dand 3D CAD programs, preferably with Pro E. Must be able to perform engineering analysis of a new product design. Must have specialized knowledge of handheld and portable devices, test equipment, and/or scientific instruments. Must have demonstrated ability to build consensus with team members, while being open and responsive to design management. Must be able to work with others as part of the product development process. Must have a design experience with injection molded plastics and die-cast metals, as well as electronic instrument design experience. Must be ale to balance design ownership with realities of manufacturability and engineering. Must have strong communication and presentation skills.Ability to speak Mandarin (as well as English) is a plus. Must be able to communicate easily with sketches and electronic presentation tools. Job Code: UK-ME2. Click here to apply.

Back to top

Operations

No current openings.

Sales

No current openings.

Marketing

Sr. Product Line Manager. POSITION LOCATED IN NORCROSS, GEORGIA. Reporting to the Vice President of Product Marketing, this Product Line Manager will be the owner of the Spectrum Analyzer portfolio. They will be responsible for the complete product life cycle, including defining the market requirements, driving engineering, and delivery of a new product line, as well as managing the current generation product line. As such, the target candidate should be familiar with the technical requirements and needs of the CATV spectrum analyzer marketplace. This senior staff member in the Product Marketing organization will serve as the expert and champion for the product line and is expected to be play both a technical and marketing leadership role. The Sr. Product Manager’s responsibilities include:

• Developing and maintaining the spectrum analyzer product line roadmap.
• Managing the complete lifecycle of both the legacy spectrum analyzer line and the next generation spectrum analyzer line.
• Developing the spectrum analyzer product line business plans and product positioning.
• Developing and executing the product line promotion plan.
• Performing the required market research, monitoring competitive activity and identifying customer needs.
• Product line pricing and profitability.
• Working with engineering to drive development of the next generation spectrum analyzer product line.
• Championing the product line within the division and the company.
• Creating and managing product line marketing collateral.

• BS in Electrical Engineering required. MBA preferred.
• 10 years experience in Product Mgmt for hardware and software intensive product lines.
• Knowledgeable in CATV RF transmission, switched digital video, MPEG, IPTV, software defined radio and related technologies.
• Strong leadership, team building and project management skills.
• Process oriented and goal driven.
• Outstanding organizational and analytical skills.
• Ability to work with minimal supervision.
• Ability to travel both domestically and internationally as necessary.
• Strong MS Office skills.
• Highly desired industries: (test equipment, CATV, telecommunications).

Marketing Specialist. POSITION LOCATED IN NORCROSS, GEORGIA. Job Description (major duties and responsibilities): The Marketing Specialist should be a high energy, creative, and organized individual. They will support the Marketing team – including the Product Line Managers and the Field Applications Marketing Managers. The Marketing Specialist will also serve as the primary liaison to corporate Marketing Communications. The Marketing Specialist will be responsible for:

• Initiating outbound marketing programs and coordinating with the rest of the Marketing team on their development – for content, target audience definition, and execution.
• Responsible for driving the publication of the divisions domestic and international channel newsletters.
• Coordinating all of the Marcom activities and collateral such as tradeshow and major events coordination, as well as datasheet creation and editing.
• Supporting Sales and channel representatives with sales tools and promotional programs.
• Assisting in the development of marketing collateral – including presentations, white papers and datasheets.
• Generating monthly reports on sales achievements by product line and by markets.
• Managing the domestic and international price list.
• Other duties as assigned. Ability to work with minimal supervision.
• Ability to travel both domestically and internationally as necessary.
• Solid MS Office skills - Highly desired industries: (test equipment, CATV, telecommunications).

• BS/BA in marketing, business or engineering required.
• Excellent verbal, written and communications skills.
• 2-5 years marketing experience in a high tech, business to business environment.
• Experience working with product introductions / new products.
• Outstanding organizational and coordinating.

Project Manager. POSITION LOCATED IN NORCROSS, GEORGIA. Reporting to the Vice President of Product Marketing, the Project Manager coordinates and tracks all aspects of Product Marketing/Product Management and Customer projects. Working closely with the Product Managers, Engineering Managers, and Manufacturing Program Managers, the Project Manager is responsible for:

• Creating the necessary project plans - including the project timeline with the various responsible parties assigned
• Coordinating and documenting project team meetings to ensure project success
• Monitoring project(s) from initiation through delivery including planning and directing schedules, coordinating internal and external resources, and monitoring budget/spending
• Driving the project to successful and on-time completion
• Escalating issues prior to criticality and with a proposed action/recovery plan Project types will include cross functional new product development and introduction, customer field trial management, and customer product deployments

Requirements for position (experience, skill, education):

• BS/BA in engineering or related required
• Project Management Professional (PMP®) certification strongly preferred
• 5-7 years experience in Project Management for hardware and software intensive programs
• 2-5 years working with product introductions/new products
• Strong leadership, team building and project management skills
• Outstanding organizational and coordinating skills
• Ability to work with minimal supervision
• Ability to travel both domestically and internationally as necessary
• Strong MS Project and MS Office skills
• Highly desired industries: test equipment, CATV, telecommunications

Product Marketing Manager 5. The Product Marketing Manager will be responsible for the overall success of a product line or a set of assigned products. Responsibilities for both inbound and outbound marketing including but not limited to:

• Market and customer research to identify current and future needs including business case development
• Develop Market Requirements Documents based on product use scenarios and to maximize return on investment and competitive position
• Enable effective product realization execution through effective communication across functional areas
• Develop and execute go-to-market launch strategies
• Create compelling messaging platform as foundation for marketing collaterals and demand generation plan
• Develop compelling sales and customer presentations to maximize impact and generate interest
• Create content for data sheets, white papers, application notes, web and articles
• Effectively present and position company expertise, technologies and products at sales conferences, seminars, press/analysts meetings, and industry events
• Develop and execute sales training program
• Develop strong ties with key customers to gather requirements and gain market share within these accounts
• Develop and maintain product road map

• 5+ years experience in telecom Product Marketing
• A passion to win
• Solid judgment and decision making skills
• Outstanding verbal, written, and communication skills
• Deep understanding of networking technologies, infrastructure and services
• The position requires 30% travel
• BSEE, MSEE or MBA are a plus

Customer Service

RMA Clerk. POSITION LOCATED IN NORCROSS, GEORGIA. Job Description (major duties and responsibilities): Interacts with customers, company sales, warehouse shipping receiving and/or service representatives to handle a variety of pre-sales or post-sales service functions. Receives customer requests and prepares documents/trouble tickets related to processing returns (RMA), servicing and exchanges. Updates databases with status of returned materials issues and accounts for returns inventory. Create and process shipping, receiving documents. Records and reports the status of equipment returns, repairs, replacements, and delivery schedules. Also, other duties as assigned.

Requirements for position (experience, skill, education): Strong customer service skills and telephone skills required. Must be detail oriented and well organized. Must be familiar with PC, Microsoft Windows, Microsoft Excel, Microsoft Word, Microsoft Access Database. Self-starter with positive attitude; Good team skills. 2 - 4 years of related experience. 2 year degree desired. Job Code: DC1-ATLRMAC. Click here to apply.

Repair Technician II. POSITION LOCATED IN NORCROSS, GEORGIA. Job Description (major duties and responsibilities):

1. Troubleshoot and repair digital, analog and RF electronic circuits on PC boards. Evaluates and Prepares cost estimates.
2. Documents and updates the repair information database.
3. Production assembly of electronic components into finished product.
4. Provides a quality service to meet QA design standards and objectives.
5. Prepares equipment for group shipments.
6. Works in a safe and secure manner.
7. Other related tasks or duties as assigned.

Customer Service Engineer. The Customer Service Engineer works as one of the key members in the customer care operations of the Customer Service supporting Sunrise Telecom's global client base. This support includes providing technical support in the use of products, analyzing, troubleshooting, and resolving product related issues. The Customer Service Engineer will provide e-mail and telephone technical support to international distributors, sales representatives, and end-user customers. Must understand, communicate, and monitor customer requirements to ensure customer satisfaction. Will verify issues reported from the field. Will provide accurate feedback to and act as customer's liaison interfacing with Sales, Product Marketing and R&D in resolving customer problems, product enhancements and/or deficiencies in a timely manner. Will document all support interaction in ticketing system and related database structure. Will participate in the development and maintenance of solution knowledgebase and customer self-service portal to provide additional customer communication channel in promoting customer satisfaction. Will be resourceful in keeping up to date with emerging technologies in the industry and product knowledge in providing professional product supports to customers and peers of the customer support team. Will assist the RMA team members with technical verification and validation of RMA requests by performing inspection and problem verification on incoming RMAs to identify software/hardware related issues, and drive for fixes and enhancements. Will perform product training to internal and external customers on as-required basis. Will perform product tests in assisting product and software releases on as-required basis. Will perform product functional tests for demo equipment deployment. Will assist with the refinement of the support process, training requirements, etc. that will improve customer satisfaction and/or reduce cost of support.

Must have Bachelor degree in electrical engineering, computer science, or relevant engineering discipline. Must have 5+ years of technical support experience in telecom related field. Must possess a combination of solid technical knowledge, strong interpersonal and problem solving skills to effectively interact with customers and team members that will allow to deliver support to customers. Must be motivated to action in resolving customer issues in a timely manner. Must have knowledge and experience in telecom access, core transmission infrastructure, T-carrier/PDH, SDH/SONET, OTN transport technologies, CAS, CCS signaling, TCP/IP, VoIP, IPTV, Ethernet, Gigabit Ethernet, Fibre Channel protocols. Must have strong verbal and written communication skills and phone presence. A second language skill is an advantage. Must have strong interpersonal skills and positive team spirit with the ability and willingness to work with other teams. Must be able to work independently and prioritize responsibilities base on dynamic changing environment. Must be able to solve problems and assist others. Must have knowledge of CRM tools, relational databases, Microsoft office and related products, Windows operating systems. Must have knowledge of Visual Basic, C, or C++ programming language and Windows programming is an advantage. Job Code: TL-CSE3. Click here to apply.

Technical Support Representative. POSITION LOCATED IN NORCROSS, GEORGIA.

1. Respond to all technical support questions received via phone or email with regards to the utilization and operations of all broadband products. Establish and execute plan of action for resolution within a reasonable time frame.
2. Provides pertinent information to Engineering, Marketing, and other departments including customer requests and/or concerns received from end customers or Sunrise representatives, as well as any inputs which may improve product quality or operation.
3. Document action items for all technical support issues not resolved.
4. Works in a teamwork environment to keep our Customer Service/Technical Support Group up to date on the latest updates/enhancements.
5. Develop product knowledge of all Broadband products/applications.
6. Upon request may be required to issue RMA’s.
7. Participate in key sales and group presentations and any related follow-up.
8. Travel may be required from time to time to support pre- and post- sale activities.

Back to top

Purchasing

No current openings.

Back to top

Finance/Administration

Controller, Broadband Operation. POSITION LOCATED IN NORCROSS, GEORGIA.

• Provide financial support to Sunrise’s Broadband operation.
• Fulfill the financial business partner role with the Broadband General Manager.
• Ensure accurate financial reporting through communication with financial services organization in San Jose, CA.
• Ensure adequate internal controls over financial functions.
• Overall responsibility for Broadband's cost & inventory accounting, financial planning and budget versus actual reporting, general ledger support, & close support.
• Manage SOX 404 compliance of Broadband's financial functions.
• Ensure proper documentation of Broadband's financial processes.
• Provide financial information to support operational decisions.

• Strong knowledge of GAAP & management accounting.
• Ability to solve complex problems & perform sophisticated financial analysis.
• Strong knowledge of accounting processes & internal controls.
• Strong inventory control and financial planning skills.
• BA with substantial accounting coursework.
• CPA -8+ years of relevant work experience.

Accounts Receivable Specialist. Job Description (major duties and responsibilities): Full cycle AR for BPG to be processed out of the San Jose location. Responsible for credit and collections for all BPG customers, cash forecasting and all AR related reconciliations associated with BPG. Assist with AR duties from other entities as required.

Requirements: 4-6 years experience of managing full cycle AR, ability to maintain a clean and accurate AR aging, excellent track record for collections, excellent communication skills. Experience with handling deferred revenue a plus. Job Code: RF-ARS. Click here to apply.

Senior GL Accountant. Job Description (major duties and responsibilities): Role within the Broadband Product Group, the primary responsibilities in this role include: - Lead person in driving the month end close for the Broadband division - Cash reconciliations - Fixed Assets - Prepaids - Sales and Use tax - Payroll reconciliation - Other general accounting support as needed.

Requirements: BS in Accounting - Minimum of 4 to 6 years of experience in a Sr GL Accountant role - Must be detail oriented and highly skilled in performing reconciliations and financial analysis - Very strong work ethic with a willingness to be flexible as new assignments are presented - Enthusiastic and eager to contribute to a team environment. Job Code: RF-SGLA1. Click here to apply.

Inventory

No current openings.

Back to top

Production

Sr. Buyer/Planner. The Sr. Buyer/Planner must be flexible to changes in activities and workload by using good judgment and effective work practices and behaviors to maintain customer satisfaction. Responsible for all aspects of materials readiness in support of production and planning. This encompasses but is not limited to, item master control, Bill of Material integrity, pre-production material pipeline, transfer to production and certain aspects of the project schedule pertaining to successful introduction / ramp. In addition, role will contribute to the ongoing development and continuous improvement of new product introduction procedures and processes, along with developing Strategic Plans in support of the business. Ability to handle complex issues with little supervision, and take on small projects with limited understanding to the scope of work. This position reports to the Director of Materials. Primary Duties:

• Leverages other TNL Teams and CM teams to ensure Supply Chain is adequate for each design/phase.
• Works closely with engineering team to ensure BOMS are released in a timely and controlled manner.
• Owns the item master, ensuring all fields of the item master are complete and correctly configured.
• Owns the integrity of the BOM in conjunction with Product Engineering, ensuring that all required components of the BOM are in place and properly structured prior to production release.
• Evaluates and identifies "Risk Buy" parts for management's approval to procure.
• Performs BOM health scrubs on PCBAs, Box Level Mechanicals highlighting and escalating shortages, component obsolescence issues, ROHS compliance, Sole / Single sourcing issues etc.
• Generates preliminary Costed BOMs and communicate projections across the Business / Eng. Teams.
• Co-ordinates and maintains the NPI forecasts (both box and board) with the Ops. PM and Demand Planning Manager to ensure the integrity of the NPI demand line, from engineering build / prototype, through pilot, pre-production ramp, and production readiness release.
• Responsible for insuring that NPI work orders are in line with the Project Plan and to see that all aspects of this process are fulfilled.
• Responsible for the disposition of ECOs, including the assignment of quantity and costs, physical disposition of scrap material and initiation of replacement/additional material.
• Responsible for the correct transactional/physical movement of engineering purchased material.
• Ownership of all the material associated with proto/pilot builds as well as ensuring that material is forecasted and available in the pipeline for the production ramp plan.
• Works with the Production Control Manager to ensure the MRP accurately reflects the proper requirements / costs and seeing that execution is taking place on the daily and weekly actions.
• Responsible for all coordinating prototype and pilot PCBA delivery, working with identified CM partners, communicating schedules, resolving shortages with the assistance of the other Buyers.
• Responsible for the transition to production release. Insuring that all data elements of the production release ECO are accurate and correctly adjusted in the item master, BOMs are accurate, and documentation is available and complete.
• Responsible for communicating any/all exceptions -material not on order, late deliveries, all process problems which delay cycle time, or BOM issues that may negatively impact product release schedules.
• Monitors purchasing cost and report findings to Materials management.
• Participates when needed in quarterly cost roll activity.
• Maintains metrics measuring prototype cycle time, aged work orders, invoice discrepancies.
• Writes and distributes a status report on an as needed basis.
• Validates PPV costs. Key Organizational Interfaces.
• Product Engineering.
• (R&D).
• Operations, Program Management.
• Quality Management.
• Contract Manufacturer.
• Supply Chain Management Characteristics.<.li>

Back to top

Tax

No current openings.

Legal

Legal Counsel. Sunrise Telecom Incorporated (Pink Sheets: SRTI.PK), a leader in testing and monitoring solutions for voice, video, data services and next generation digital multi-media, is currently seeking a motivated and talented attorney to support our Chief Legal and Compliance Officer and Secretary and perform a wide variety of legal functions. The successful candidate must be highly motivated, organized, hard working and capable of working on a variety of routine to complex legal matters. Such matters include:

• Assistance with compliance matters dealing with the Code of Conduct and Ethics, FCPA, export controls, customs/import issues, etc.
• Assistance with sales related and general contract matters.
• Assistance with securities and securities compliance matters.
• Assistance with organization, maintenance and support of domestic and international subsidiaries.

Back to top

International

No current openings.

Back to top

Internship Positions

Engineering

Manufacturing Engineer. INTERNSHIP POSITION. As a Manufacturing Engineering Intern, you will participate in developing assembly and test procedures used in pilot production of Sunrise Telecom Inc test field application equipment. This hand-held and portable test equipment is used worldwide by major carriers and service providers to install, maintain, and diagnose the telecommunications network. You will work in support of senior engineering staff in various aspects of manufacturing, quality, reliability, and environmental compliance (RoHS). You must be working toward a degree in Electrical Engineering, Computer Science, Computer Engineering, or Industrial Engineering and have completed your junior year. A working knowledge (completed course work) of statistics, circuit design, programming C++/TCL, and hands on analysis capability highly desirable. You must have solid communications skills, fluency in English, and able to work within a group but still make progress independently. Job Code: WB-MEI08. Click here to apply.

How to Apply

Sunrise Telecom is an Equal Opportunity Employer and offers a competitive benefits package including health/dental/vision/life insurance, 401(k) program, Employee Stock Purchase Plan (ESPP), and profit sharing.

To apply for a position at Sunrise, click here to submit your resume & cover letter electronically.

To mail us your resume, use this address:
Sunrise Telecom Incorporated
Attn: Human Resources
302 Enzo Drive
San Jose, CA 95138

FAX us at: 408-363-8313

Back to top

[ Company | Products | Support/Services | Sales | Contact Us ] Copyright 1991-2008 Sunrise Telecom Incorporated. All Rights Reserved. Users of this site agree to be bound by Sunrise Telecom Incorporated User Agreement, Trademark Guidelines, and Privacy Policy. This Web site is subject to change without notice. All other products and company names are trademarks of their respective corporations.