Last Updated January 14, 2009
Put your expertise in the telecommunications field to work for a dynamic and
growing company. Sunrise is paving the way for broadband deployment -
helping service providers and manufacturers solve the complex problems
involved in installing, troubleshooting, and maintaining their networks.
Sunrise Telecom is an Equal Opportunity Employer and offers a
comprehensive benefits package including:
- Health/vision/dental coverage
- Life/travel/disability Insurance
- Paid holiday/personal leave
- 401(k) program
- Educational development assistance
If you enjoy being part of a skilled and enthusiastic team, come take a
look at our current job opportunities.
- Unless otherwise stated all positions are located in San Jose,
California.
- The benefits package above does not apply to internship positions.
Engineering
Hardware
Senior Hardware Engineer. This person will be a key
member of Sunrise Telecom's core design team for handheld and portable test
equipment. The Senior Hardware Engineer will use in-depth knowledge and
experience in digital circuit board design and FPGA design to develop
state-of-the-art designs that meet market needs, with an emphasis on
compact, low-to-moderate cost, low-power applications. The successful
candidate will be a self-starter and require minimal supervision. Design
responsibilities include design of complex, multi-million gate FPGAs (Xilinx
and Altera); logical and physical synthesis; logic simulation; and an
understanding of static timing analysis and floor planning techniques. The
qualified candidate will be knowledgeable in Verilog and/or VHDL,
industry-standard simulators (ModelSim), FPGA Synthesis tools (Synplicity,
ISE, Quartus), and in design flows starting from a high-level specification
through gate-level netlist. Additionally, candidate should be knowledgeable
in board design having experience with industry standard tools such as ORCAD
schematic capture. Requirements for position: . Must be skilled at analyzing
design requirements . Must have a proven track record in the design and test
of digital circuits and FPGAs for telecommunication applications . Must be
able to guide embedded firmware engineers in implementing code to control
digital hardware . Must be a hands-on person who knows how to use test
equipment and troubleshoot complicated, elusive problems and circuits . Must
have proven track record of quality products developed in short time frame
schedules . Must understand how to design for manufacturability . Must be a
good team player as well as someone who can take ownership of their own and
possibly others designs independently . Working knowledge of TCP/IP This
position requires a BSEE or equivalent with 8+ years direct experience in
development, design and support of digital circuits and products, with
n specific experience in telecommunication or test and measurement products.
An MSEE with 8 years experience is preferred. Job Code: FN-SHE.
Click here
to apply.
Software
No current openings.
Firmware
No current openings.
Testing
No current openings.
Program/Project
Project Engineer. The Project Engineer will prepare and
track project schedules and milestones, and will report on project
performance and metrics. Will work closely with Engineering functional
managers to plan new projects. Together with those functional managers will
prepare detailed project schedules; regularly collect status data; maintain
project schedules; analyze schedule data and advise Directors and the VP of
Engineering on project issues and status; track deliverables and provide
reports on their status; prepare reports on project metrics. The position
requires a technical degree plus 4 or more years experience. Skills
required: - Strong organization and planning skills - Excellent
communication: written and verbal - Well-organized - Analytical skills
-Computer skills: scheduling software. Job Code: FN-PE. Click
here to apply.
Quality
No current openings.
Mechanical
Mechanical Engineer I. The Mechanical Engineer you will be responsible for the support, design, and analysis of new and/or existing mechanical hardware as part of an engineering team. Will work closely with electrical engineers and industrial designers to develop package designs for Sunrise Telecom's handheld and portable test instruments. These instruments are hand-held and portable test equipment that are used worldwide by major carriers and service providers to install, maintain, and diagnose the telecommunications network, and range from the Scalable Test Toolkit (STT) to the recently released Home Test Toolkit (HTT). New product design will include various types of analysis, mechanical packaging of electronics, CAD concept model generation, and creation of program metrics. Interaction with internal customers and suppliers will occur depending upon the nature of the project - this may include travel to other sites or suppliers.
Requirements for position:
- Bachelor of Science or MS degree in Mechanical Engineering.
- 0-2 year experience in mechanical design - course related design will be considered as experience.
- Experience in the use of Pro/E CAD tool.
- Excellent verbal and written communications skills.
- Excellent problem solving skills.
- Ability to manipulate several tasks in a fast-paced environment.
- Highly motivated, self-starting individual.
- Strong teamwork skills.
- Experience with other CAD tools such as SolidWorks and/or AutoCAD is a plus.
- Experience with finite element analysis and/or thermal analysis is a plus.
- Experience with plastic injection molding and/or die casting is a plus.
Job Code: UK-MEE08. Click
here to apply.
Mechanical Engineer II. The Mechanical Engineer II will develop
chassis/package designs for Sunrise Telecom's handheld and portable test
equipment. Will work closely with management, marketing, and other engineers
to design industry-leading handheld and portable test equipment for
telecommunications, and will act as liaison between engineering and
manufacturing on mechanical design issues. Will consult with electronic
hard
ware engineering, marketing, production, sales, and customers to
establish design concepts. Will evaluate design ideas based on factors such
as design-function relationships, serviceability, materials and methods
engineering, application, budget, price, production costs, methods of
production, market characteristics, and specifications, and then integrates
findings and concepts into design ideas. Will prepare and/or coordinate
preparation of working drawings from sketches and design specifications.
Will present the design to Marketing and Engineering management and discuss
needs for modification and change. Will prepare designs, and will work with
offshore manufacturing to build models and/or mock-ups, obtain internal
approvals, and shepherd the design through the development, prototype,
pilot, and production processes. Responsibilities of this position will
include, but will not be limited to: design and development of new products,
as well as modifications to existing products; communication with vendors
and suppliers; implementing designs into production; material selection;
standards compliance (UL, CE, etc.); safety reviews; using design
development tools and techniques; Design for Manufacture, Assembly and
Inspection; CAD and 3D Design tools.
Must have experience in the most of the following areas: plastic injection
molding; die-cast molding; electronic packaging; stamping; CNC;
manufacturing processes; CAD (Pro E preferred); geometric tolerancing;
thermal analysis; design for assembly/manufacturability/ quality; and
experience with off-shore sourced products. Must have B.S.M.E. or equivalent
plus 3 or more years experience in commercial/industrial product design and
development. Must be proficient in 2Dand 3D CAD programs, preferably with
Pro E. Must be able to perform engineering analysis of a new product design.
Must have specialized knowledge of handheld and portable devices, test
equipment, and/or scientific instruments. Must have demonstrated ability to
build consensus with team members, while being open and responsive to design
management. Must be able to work with others as part of the product
development process. Must have a design experience with injection molded
plastics and die-cast metals, as well as electronic instrument design
experience. Must be ale to balance design ownership with realities of
manufacturability and engineering. Must have strong communication and
presentation skills.Ability to speak Mandarin (as well as English) is a
plus. Must be able to communicate easily with sketches and electronic
presentation tools. Job Code: UK-ME2. Click
here to apply.
Back to top
Operations
No current openings.
Sales
No current openings.
Back to top
Marketing
Product Marketing Manager 5. The Product Marketing Manager will be
responsible for the overall success of a product line or a set of assigned
products. Responsibilities for both inbound and outbound marketing including
but not limited to:
- Market and customer research to identify current and future needs
including business case development
- Develop Market Requirements Documents based on product use scenarios
and to maximize return on investment and competitive position
- Enable effective product realization execution through effective
communication across functional areas
- Develop and execute go-to-market launch strategies
- Create compelling messaging platform as foundation for marketing
collaterals and demand generation plan
- Develop compelling sales and customer presentations to maximize impact
and generate interest
- Create content for data sheets, white papers, application notes, web
and articles
- Effectively present and position company expertise, technologies and
products at sales conferences, seminars, press/analysts meetings, and
industry events
- Develop and execute sales training program
- Develop strong ties with key customers to gather requirements and gain
market share within these accounts
- Develop and maintain product road map
Must have:
- 5+ years experience in telecom Product Marketing
- A passion to win
- Solid judgment and decision making skills
- Outstanding verbal, written, and communication skills
- Deep understanding of networking technologies, infrastructure and
services
- The position requires 30% travel
- BSEE, MSEE or MBA are a plus
Job Code:
BM-PMM.
Click
here to apply.
Back to top
Customer
Service
RF Repair Technician. The Repair Technician will work as
a member in the service team in performing upgrade, repair and calibration
on broadband cable TV products such as 1.5 GHz spectrum analyzer, DOCSIS
cable modem system analyzer, RF multiplexer switches. Major responsibilities
include:
- Verify problem reported and document findings on field returned
products.
- Troubleshoot, identify failure mode and repair to component level and
document relevant repair actions in details to facilitate failure
analysis.
- Perform firmware and software upgrade.
- Evaluate and prepare cost estimates on products returned for upgrade
and/or repair.
- Setup and perform board level, subassembly, system and calibration
tests. Interpret test results ensuring products being tested meet
pertaining specifications.
- Work closely with Customer Service Representatives in reporting
anomaly observed during troubleshooting.
- Provide support to technical support team and/or customer on product
service issues.
- Maintain test fixtures, test equipment and calibration stations in
good working conditions.
Requirements:
- Solid knowledge, experience in troubleshooting digital QAM 256 modem,
RF amplifier, tuner, mixer, switch circuitry in sub-assembly and
component level, performing RF and IF tuning.
- Fine pitch soldering skill on SMT digital and RF/IF components.
- Strong verbal and written communications skills.
- Able to work with minimal supervision and complete tasks on schedule,
be flexible in accommodating shifting priorities.
- A team player and able to work in cross-functional environment.
- Be organized and detail oriented.
- 4 years relevant experience in RF and/or CATV product repair
experience.
- ASEE or equivalent degree.
Job Code: TL-RFRT1. Click
here to apply.
Senior RF Repair Technician. The Senior RF Repair
Technician will work as a member in the service team in performing upgrade,
repair and calibration on broadband cable TV products such as 1.5 GHz
spectrum analyzer, DOCSIS cable modem system analyzer, RF multiplexer
switches. Major responsibilities include:
- Verify problem reported and document findings on field returned
products.
- Troubleshoot, identify failure mode and repair to component level and
document relevant repair actions in details to facilitate failure
analysis.
- Perform product failure analysis.
- Perform firmware and software upgrade.
- Evaluate and prepare cost estimates on products returned for upgrade
and/or repair.
- Setup and perform board level, subassembly, system and calibration
tests. Interpret test results ensuring products being tested meet
pertaining specifications.
- Work closely with Customer Service Representatives in reporting
anomaly observed during troubleshooting.
- Provide support to technical support team and/or customer on product
service issues.
- Maintain test fixtures, test equipment and calibration stations in
good working conditions.
Requirements:
- Solid knowledge, experience in troubleshooting digital QAM 256 modem,
RF amplifier, tuner, mixer, switch circuitry in sub-assembly and
component level, performing RF and IF tuning.
- Fine pitch soldering skill on SMT digital and RF/IF components.
- Knowledge in Windows CE, Linux operating systems, TL1 and shell
scripting.
- Strong verbal and written communications skills.
- Able to work with minimal supervision and complete tasks on schedule,
be flexible in accommodating shifting priorities.
- A team player and able to work in cross-functional environment.
"X Be organized and detail oriented.
- Minimum 6 years relevant RF and/or CATV product repair experience.
- ASEE or equivalent degree.
Job Code: TL-SRFRT2. Click
here to apply.
Back to top
Purchasing
No current openings.
Back to top
Finance/Administration
No current openings.
Back to top
Inventory
No current openings.
Back to top
Production
RF Technician. The RF Technician will work in the
manufacturing engineering team to build RF CATV test and monitoring
equipment manufacture as it relates to digital video such as MPEG, HFC
networks QAM 64-256, and multiplexers. Will assist in initial transfer of
Sunrise Telecom Inc AT1600 and AT2500 products from Montreal to San Jose
facility, understand and perform tasks per existing procedures to process to
build RF CATV equipment. Will perform tuning and quality control (testing)
procedures for various components and PCA's for RF and digital modules. Will
perform debug and repair of spectrum analyzer products. The successful
candidate will have experience in most of the following areas: CATV
(telecommunications a plus), equipment measurement usage, and background in
RF and mixed signal. Work in the manufacturing engineering team to build RF
CATV test and monitoring equipment manufacture as it relates to digital
video such as MPEG, HFC networks QAM 64-256, and multiplexers. Will assist
in initial transfer of Sunrise Telecom Inc AT1600 and AT2500 products from
Montreal to San Jose facility, understand and perform tasks per existing
procedures to process to build RF CATV equipment. Will perform tuning
and quality control (testing) procedures for various components and PCA's
for RF and digital modules. Will perform debug and repair of spectrum
analyzer products. The successful candidate will have experience in most of
the following areas: CATV (telecommunications a plus), equipment measurement
usage, and background in RF and mixed signal. Requirements: . Ability to
travel for first 3 months (multiple trips) of assignment (Canada) . ASEE or
equivalent degree plus 1-2 years RF experience preferably in CATV
applications . High degree of skill in soldering and RF circuit tuning
(transformers, coils, etc). . Ability to debug and repair mixed signal
circuits . Good communications skills (verbal and written) . Ability to work
independently with little supervision or day-to-day guidance . Ability to
work intra-departmental with other RF technicians in daily operations of RF
circuit/device tuning. Job Code: WB-RFTEC5. Click
here to apply.
Senior RF Technician. The Senior RF Technician
will work in the manufacturing engineering team to build RF CATV test and
monitoring equipment manufacture as it relates to digital video such as
MPEG, HFC networks QAM 64-256, and multiplexers. Will assist in initial
transfer of Sunrise Telecom Inc AT1600 and AT2500 products from Montreal to
San Jose facility, understand and perform tasks per existing procedures to
process to build RF CATV equipment. Perform tuning and quality control
procedures (testing) for various components and PCA's to improve RF signal
processing. Will perform debug and repair of spectrum analyzer products. The
successful candidate will have experience in most of the following areas:
CATV (telecommunications a plus), equipment measurement usage, and strong
background in RF. . Ability to travel for first 3 months (multiple trips) of
assignment (Canada) . ASEE or equivalent degree plus 3-5 years RF experience
preferably in CATV applications . High degree of skill in soldering and RF
circuit tuning (transformers, coils, etc). . Good communications skills
(verbal and written) . Ability to work independently with little supervision
or day-to-day guidance . Ability to work intra-departmental with other RF
technicians in daily operations of RF circuit/device tuning. Job Code: WB-RFTEC1.
Click here
to apply.
Back to top
Tax
Director of Tax and Treasury. This position is for
an experienced strategic thinker as well as an individual contributor who is
able to make a difference. Significant contribution with review of daily
compliance, detailed modeling and planning. A mentor, team player and
professional resource with direct responsibility for ensuring all tax
compliance is filed timely and accurately. Additionally this individual will
need to continually update their professional and technical expertise as
well as the expertise of a senior tax analyst and inform management of
legislative and industry developments. Areas covered include but are not
limited to:
- Sales tax, use tax, property tax, payroll tax, federal income tax,
multi-state income tax,
- R&D credit documentation, international structuring and planning,
transfer pricing, structuring planning for acquisitions,
reorganizations,
- quarter tax provisions, effective tax rate analysis, tax estimates,
FAS 109, FIN 48, etc.
- Assist with the coordination and management of tax audits and defense
of positions, responsibilities involving coordination and management of
all tax filings.
- Various corporate projects and initiatives, cash flow forecast, manage
company investments, balance sheet forecast, insurance and risk
management, subsidiary capitalization, repatriation and funding and
financing strategies.
- Treasury experience with cash management and planning, working with
banks, line of credit and letters of credit.
BS and/or MS degree in accounting or finance with 8 to 10 years
experience in tax required, combining corporate tax/treasury department and
big 4 public accounting experience. CPA certification and/or master in
taxation/MBA, leader, mentor, self starter, team player, energetic and
aggressive, must possess a thorough working knowledge of FAS109 and FIN 48,
excellent interpersonal and communication skills. Ability to get into the
details of an accounting system and reconcile accounts, clear understanding
of accounting systems. Strong analytical skills, solid excel skills and
possible 5 to 10% travel. Job Code: RK-DTT01. Click
here to apply.
Back to top
Legal
No current openings.
Back to top
International
No current openings.
Back to top
Internship
Positions
No current openings.
How to
Apply
Sunrise Telecom is an Equal Opportunity Employer and offers a competitive
benefits package including health/dental/vision/life insurance, 401(k)
program, Employee Stock Purchase Plan (ESPP), and profit sharing.
To apply for a position at Sunrise, click
here to submit your resume & cover letter electronically.
To mail us your resume, use this address:
Sunrise Telecom Incorporated
Attn: Human Resources
302 Enzo Drive
San Jose, CA 95138
FAX us at: 408-363-8313
