The Next-Generation, Scalable Solution for Communications Network Testing
The Scalable Test Toolkit (STT®) is an advanced, modular, and flexible communication testing solution to address Layer 1 through Layer 7 requirements, from fiber optics to Quality of Service. The patented STT platform consists of a display unit (Control Module), a variety of test modules, and a Power Supply Module. The STT Manager software controls a wide variety of test modules from the STT Control Module or your PC.
Highlights
- Fully independent or stackable test modules
- Ultra-bright LCD touch screen
- Intuitive User Interface
- Familiar Microsoft Windows XP® Interface
- Fixed IP or DHCP terminal emulation
- Remote operation or standalone capabilities with PC
- Several power supply options
- Optional battery for uninterrupted testing
Benefits
- Portable
- Flexible & dynamic
- Local or remote configuration (ideal for probing network architecture)
- Multiple tests can be run simultaneously
- Convenient & cost effective
Platform Highlights
- All STT modules are equipped with a unique standalone capability that can fully operate independent from the platform with a variety of test engines for different technologies, services, and applications
- All measurements and calculations are done in the module, through a combination of dedicated hardware, digital signal processors, and microprocessors
- Graphical user interface manages tests & view results using the Control Module or PC with Microsoft Windows XP
Test Applications
40G (STT 40G)
- OTN, SDH, SONET in one instrument
- 10/10.7G auxiliary port to interconnect STT-40G module with other 10G systems
- Fully independent or can be combined with other test modules to enhance application
- Internal SDH/SONET mapping down to VC12, VC11, VT1.5, VT2
- Complete performance tests and analysis for point to point links and DWDM networks
- Comprehensive SDH/SONET/OTN overhead control and decode
- Auto-configuration
- Stand-alone operation (no platform required)
- Complies to ITU-T, Telcordia, and ANSI standards
Metro and Ethernet (STT 10G Ethernet)
- 10/100/1000 Mbps Ethernet
- 10 GigE: LAN & WAN
- Layer 1, 2, and 3, VLAN, MPLS
- BERT and RFC 2544, IP Testing, Packet Capture & Decode
- Multi-port and Multi-stream
Next Generation Core Network (STT ONE)
- OTN OTU-1 and OTU-2
- SDH, SONET, and EoS to 10 Gbps
- GFP, LCAS, VCAT
- Differential delay generation
- Optical power and frequency measurements
Platform Specifications
| STT-1000 Control Module |
| System |
Tablet PC with Intel™ Celeron processor |
| LCD Display |
10.4"(26.4 cm)color; active matrix SVGA
Touch screen
External monitor port, up to 1600x1200 |
| Operating System |
Microsoft Windows XP™ Professional SP2
Proloaded Applications:
- STT Platform Manager software
- Adobe Acrobat Reader™ - OpenOffice™ suite installer |
| Storage/Memory |
256MB RAM
Internal 40 GB hard drive
Removable flash memory support (USB, CF)
*Compact flash card adapter not included |
| UI and control software |
STT Test Software Intuitive graphical user interface to control and view results of test modules. Runs on Control Module or PC with Windows™ 2000 or Wi ndows XP™ Professional |
| Interfaces |
2 USB ports
1 Ethernet 10/100 BaseT
1 PS/2 mouse/keyboard 6-pin DIN
1 RS-232 serial port, DB-9
1 External monitor port, HD-B15
1 Headset (mic and headpohne), 3.5mm jack |
| Audio (for test applications) |
Integrated audio speaker (mono)
Integrated microphone |
| Size (W x H x D) |
320 x 240 x 50 mm
12.6 x 9.5 x 2.0 in |
| Weight |
2.8 kg / 6.17 lb |
| Power Requirement |
Requires STT-1500 series power supply and test module |
|
Standalone Mode
STT modules work with an external PC, offering 100% of their testing capabilities in local or remote environments.
| STT Test Module in Standalone Mode |
Minimum System Requirements
 |
- Intel® processor
- Microsoft Windows XP™ Professional SP2
(Not certified or recommended for use with Windows® Vista)
- SVGA (800x600) screen
- 256 MB of system RAM
- 20 GB Hard Drive
- 100 BaseT Ethernet port
- Removable storage (USB, CF, or CD-ROM)
- Pointing device (mouse or touch screen)
- STT Manager software installed
- STT Module test application (GUI) software installed |
|
