  |
A Leading Supplier of
Telecommunications Service Verification Equipment
|
|
|
Optics
Testing Course Description
|
You are here >> Training >>
Optics Testing Course Description
|
|
|
|
|
This course is designed to train network technicians and engineers how to test and maintain optical and electrical networks using any of the following test sets: The SunSet OCx, SunSet T1, SunSet T3, and SunSet 10G. The course covers the underlying technology, test set operation, and hand-on laboratories. The three days of course offering can be taken sequentially for complete training of T-carrier, SONET, and ATM network testing. The three days can also be broken into one or two day courses to meet an individuals network responsibilities.
|
Click
here to register with us, for any further questions, please
view the enrollment
FAQ, email us at training@sunrisetelecom.com
or call 1-888-242-7077/1-408-360-1202.
| Location:
San Jose, California, USA |
| |
Tuesday |
Wednesday |
Thursday |
| Focus |
T-Carrier |
SONET |
ATM |
| AM
9:00 - 12:00 |
T1 and VF technology overview. Testing T1 and VF circuits with the SunSet T1, T10, or OCx.
T3 technology overview. Testing T3 circuits with the SunSet OCx.
|
Fiber optic and SONET technology overview. Testing SONET based networks with the SunSet OCx and 10G. |
ATM technology overview. Testing ATM networks with the SunSet OCx and SunSet SDH. |
| PM
1:00 - 3:15 |
T1 hands-on laboratory |
Advanced SONET technology. Advanced SONET features of the SunSet OCx and 10G. |
ATM hands-on
laboratory |
| PM
3:30 - 5:00 |
T3 hands-on laboratory |
SONET hands-on laboratory |
Travel |
| Schedule |
| March,
2004 |
Mar.
2, 2004 |
Mar.
3, 2004 |
Mar.
4, 2004 |
| May,
2004 |
May
4, 2004 |
May
5, 2004 |
May
6, 2004 |
|
Training Tracks
|
| SONET
Track |
Day 2
Course Number: TCD201 |
$750.00 |
| ATM
Track |
Day
3
Course Number: TCD202 |
$550.00 |
| T-Carrier
and SONET Track |
Days 1
and 2
Course Number: TCD203 |
$1050.00 |
| SONET
and ATM Track |
Days
2 and 3
Course Number: TCD204 |
$1150.00 |
| Full
Course |
Days
1, 2, and 3
Course Number: TCD205 |
$1500.00 |
Who Should Attend
- Service provider technician or engineer involved with installation, provisioning, maintenance, or performance optimization of optical and/or T-carrier networks.
- Enterprise or ISP personnel involved with network verification or optimization.
- Equipment manufacturer installation technician or engineer.
- Laboratory
engineer involved with equipment or system design.
Pre-requisites
A basic understanding of telephony and PSTN architecture
Familiarity with the concept of a digital DS-0 voice channel
Basic understanding of transport media (twisted pair, coax, optical fiber)
Some familiarity with broadband access technologies (DSL, DLC, ISDN)
Basic telephone system terminology and acronyms (CO, MDF, CPE, IW)
Objectives
Objectives vary depending on Track.
Day 1: T-Carrier
Objectives
Voice Frequency Features
Talk and listen or drop and insert tones
Measure level, frequency, and noise
Bi-directional monitor of signaling bits over 24 channels
Dialing and Analysis
Place and receive calls: MF, DTMF, and DP
E&M, ground-start, loop-start, and custom trunks
Auto scan mode for incoming calls
Digit analysis: time stamp, frequency, level, twist, etc
Describe common uses of T-1 circuits
List the major components of a T-1 circuit
List common interfaces available for T-1 devices
Compare and Contrast AMI and B8ZS line coding
Compare and Contrast D4 and ESF framing
Discuss Robbed Bit Signaling, and possible implications on data over T-1
Day 2: SONET
Objectives
SONET Introduction
STS Frame Format
SONET Defect & Alarm Structure
SONET Network Elements
SONET Network Configurations
Pointers
Multiplexing Hierarchy
Virtual Tributaries
Defects & Alarm Structure
Automatic Protection Switching
Tandem Connections
Network Synchronization
WDM
Day 3: ATM
Objectives
Ensure correct operation of the transmission layer (SONET, SDH, ADSL, etc.)
ATM network performance analysis (quality of service)
Sensor tests (alarms)
OAM management
Traffic management (usage parameter control, etc.) Use and importance of the ATM adaptation layer.
Test for error-free operation
Analysis and troubleshooting within the services and applications used, internetworking.
SVC signaling tests
Services: ILMI, LANE, MPOA, etc.
Determining system loading and traffic profile
|
|
|
|
